Injector for use in high voltage isolators for liquid feed lines

An improved injector is described for use in introducing fluid substances into feed lines employed in delivering flowing bodies of liquids. The injector includes a porous plug, concentrically related to a feed line, including an internally tapered surface of a truncated conical configuration with an inlet orifice of a first diameter substantially smaller than the first diameter and an external surface circumscribed by an annular chamber containing a body of insulating gas

Map projections for larger-scale mapping

For the U.S. Geological Survey maps at 1:1,000,000-scale and larger, the most common projections are conformal, such as the Transverse Mercator and Lambert Conformal Conic. Projections for these scales should treat the Earth as an ellipsoid. In addition, the USGS has conceived and designed some new projections, including the Space Oblique Mercator, the first map projection designed to permit low-distortion mapping of the Earth from satellite imagery, continuously following the groundtrack. The USGS has programmed nearly all pertinent projection equations for inverse and forward calculations. These are used to plot maps or to transform coordinates from one projection to another. The projections in current use are described

A summary of rotor-hub bending moments encountered by a high performance hingeless- rotor helicopter during nap-of-the-earth maneuvers

Rotor-hub bending moment measurements on hingeless rotor helicopter during abrupt maneuvers near groun

Rotorcraft flight research with emphasis on rotor systems

Over fifty years of contributions by NASA and the Army through rotor systems flight research were examined with an emphasis on the last 25 years. During this time, the helicopter has gone from an abnormality that did a few useful things to a vehicle that is a necessity to life in this country and a major part of all military forces in the world. Major data acquisition programs like the H-34 and White Cobra have been undertaken that have increased the understanding of the aerodynamic behavior of the rotor system. Specialized programs like the Ogee tip on the UH-1 and the flight tests of the hingeless rotor helicopters, the XH-13 and XH-51N, contributed greatly to the understanding of these technologies. The extensive airfoil test program also undertaken on the White Cobra provided valuable data on advanced airfoil configurations

Vehicle for civil helicopter ride quality research

A research aircraft for investigating the factors involved in civil helicopter operations was developed for NASA Langley Research Center. The aircraft is a reconfigured 17000 kg (36000 lb) military transport helicopter. The basic aircraft was reconfigured with advanced acoustic treatment, air-conditioning, and a 16-seat airline cabin. During the spring of 1975, the aircraft was flight tested to measure interior environment characteristics - noise and vibration - and was flown on 60 subjective flight missions with over 600 different subjects. Data flights established noise levels somewhat higher than expected, with a pure tone at 1400 Hz and vertical vibration levels between 0.07g and 0.17g. The noise and vibration levels were documented during subjective flight evaluations as being the primary source of discomfort. The aircraft will be utilized to document in detail the impact of various noise and vibration levels on passenger comfort during typical short-haul missions

Tool for installing or extracting small bulbs in limited-access spaces

Installing and extracting component of tool is plastic tubing with inside diameter which provides snug fit over bulb. Other components, which provide sturdiness and ease of operation, consist of metal tube, with collar near one end, and plunger, with knob on one end and Teflon tip on the other

High-temperature LM cathode ion thrusters Quarterly progress report, 5 May - 4 Aug. 1968

Design and operation of high temperature liquid mercury cathode ion thruster

An optical heterodyne densitometer

Researchers are developing an optical heterodyne densitometer with the potential to measure optical density over an unprecedented dynamic range with high accuracy and sensitivity. This device uses a Mach-Zender interferometer configuration with heterodyne detection to make direct comparisons between optical and RF attenuators. Researchers expect to attain measurements of filter transmittance down to 10 to the minus 12th power with better than 1 percent uncertainty. In addition, they intend to extend the technique to the problem of measuring low levels of light scattering from reflective and transmissive optics

Concepts for on-board satellite image registration. Volume 3: Impact of VLSI/VHSIC on satellite on-board signal processing

Anticipated major advances in integrated circuit technology in the near future are described as well as their impact on satellite onboard signal processing systems. Dramatic improvements in chip density, speed, power consumption, and system reliability are expected from very large scale integration. Improvements are expected from very large scale integration enable more intelligence to be placed on remote sensing platforms in space, meeting the goals of NASA's information adaptive system concept, a major component of the NASA End-to-End Data System program. A forecast of VLSI technological advances is presented, including a description of the Defense Department's very high speed integrated circuit program, a seven-year research and development effort

Zone Leveling Crystal Growth of Thermoelectric PbTe Alloys with Sb_(2)Te_3 Widmanstätten Precipitates

Unidirectional solidification of PbTe-rich alloys in the pseudobinary PbTe-Sb_(2)Te_3 system using the zone leveling technique enables the production of large regions of homogeneous solid solutions for the formation of precipitate nanocomposites as compared with Bridgman solidification. (PbTe)_(0.940)(Sb_(2)Te_3)_(0.060) and (PbTe)_(0.952)(Sb_(2)Te_3)_(0.048) alloys were successfully grown using (PbTe)_(0.4)(Sb_(2)Te_3)_(0.6) and (PbTe)_(0.461)(Sb_(2)Te_3)_(0.539) as seed alloys, respectively, with 1 mm h^(–1) withdrawal velocity. In the unidirectionally solidified regions of both alloys, Widmanstatten precipitates are formed due to the decrease in solubility of Sb_(2)Te_3 in PbTe. To determine the compositions of the seed alloys for the zone leveling experiments, the solute distribution in solidification in the PbTe-richer part of the pseudobinary PbTe-Sb_(2)Te_3 system has been examined from the concentration profiles in the samples unidirectionally solidified by the Bridgman method